Wheels: Testing and Inspection
WHEEL RUNOUT1. Jack up the vehicle and support it with floor stands.
2. Measure wheel runout with a dial indicator as illustrated.
3. Replace the wheel if wheel runout exceeds the limit.
Wheel runout [Limit]
Steel wheel
Radial: 0.6 mm (0.024 inch)
(Average of LH & RH)
Axial: 1.0 mm (0.039 inch)
Aluminum type wheel
Radial: 0.3 mm (0.012 inch)
Axial: 0.3 mm (0.012 inch)