Tie Rod End: Testing and Inspection

CHECKING TIE ROD END BALL JOINT STARTING TORQUE





1. Mount two nuts on the ball joint, and then measure the starting torque.
Standard value:
Tightening torque
Tie rod end ball joint starting torque 0.5 - 2.5 Nm (5 - 25 kg-cm, 4 - 22 ft. lbs.)
2. If the starting torque exceeds the standard value, replace the tie rod end.

NOTE: Even if the starting torque is below limit of the standard value, the ball joint may be reused unless it has drag or excessive play.