Component Inspection

Inspection
Check to look that fuel level is over 15 %. If not, this inspection is not available.

The vehicle must be in turn-on and at idle. Don't forget it.




1. Prepare a voltmeter and connect it to FTP pins as shown.




2. After 20 min. idling, inspect the voltage.

System voltage 5 V
At accelerate Max. 4.5 V, Min. 0.5 V

3. At idle, inspect that voltage fluctuates up to accelerate rpm up and down.

NOTE: If voltage is not within spec as procedures, there is leakage and inspect the fuel tank and hoses toward canister and fuel neck. Then repair or replace relevant parts.