Rear Seat Belt

REMOVAL AND INSTALLATION

Rear Seat Belt

1. Remove the covering shelf center trim and side trim.

2. Remove the mounting bolts (12 mm) from the rear seat cushion.

Tightening torque:
17 - 26 Nm (170 - 260 kg.cm, 12.2 - 18.7 lb.ft)

3. Remove the mounting bolts (12 mm) from the rear seat back.

Tightening torque:
17 - 26 Nm (170 - 260 kg.cm, 12.2 - 18.7 lb.ft)

4. Remove the rear seat back lower side mounting bracket

5. Remove the upper anchor mounting bolt (14 mm) from the rear

6. Remove the rear speaker grill and speaker from the quarter inner trim.

7. Remove the quarter inner trim.

8. Remove the rear seat belt upper and lower mounting bolt (14 mm) and screw (1EA) from the rear seat belt.

Rear Seat Belt Buckle

1. Remove the mounting bolts (12 mm) from the rear seat cushion.

Tightening torque
17 - 26 Nm (170 - 260 kg.cm, 12.2 - 18.7 lb.ft)

2. Remove the rear seat belt buckle.
3. Installation is the reverse of removal