Accelerator Pedal: Service and Repair

Accelerator Pedal:

REMOVAL




1. Remove the bushing and inner cable on the accelerator arm side.




2. Remove the bolts of the accelerator arm bracket and remove.

INSTALLATION




1. When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.

Accelerator Bracket Sealant Points:

2. Apply sealant to the bolt mounting hole, and tighten the accelerator arm bracket.

Accelerator arm bracket bolts : 8 - 12 Nm (80 - 120 kg.cm, 5.8 - 7.2 lb.ft)