FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2001 >> Tiburon L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Accessory Bracket >> Service and Repair

Engine Accessory Bracket: Service and Repair

TENSIONER AND BRACKET TENSIONER AND TENSIONER MOUNTING BRACKET

Tensioner And Tensioner Mounting Bracket:






REMOVAL




1. Lift up the vehicle.
2. Remove the RH-side front wheel and tire.
3. Remove the under cover.




4. Remove the locking nut of the tensioner.
5. Remove the tensioner pulley and tensioner assembly from the tensioner mounting bracket.




6. Remove the mounting bolt of the tensioner mounting bracket.
7. Remove the tensioner mounting bracket.

INSTALLATION







Installation is the reverse order of removal.

NOTE: After installation, lower the vehicle and check whether the tension of the compressor drive belt is proper or not. If not, adjust properly.

pro multis Credits:Operation CHARM About Operation CHARM