With Scan Tool
USING HI-SCAN
1. Turn OFF the ignition switch.
2. Connect the HI-SCAN to the data link connector.
3. Turn ON ignition switch.
6. Use the HI-SCAN to erase the diagnostic trouble code.
7. Disconnect the HI-SCAN.
USING HI-SCAN
1. Turn OFF the ignition switch.
2. Connect the HI-SCAN to the data link connector.
3. Turn ON ignition switch.
6. Use the HI-SCAN to erase the diagnostic trouble code.
7. Disconnect the HI-SCAN.