Brake Hose/Line: Service and Repair

REASSEMBLY
1. Install the brake hoses without twisting them.
2. The brake tubes should be installed away from sharp edges, weld beads or moving parts.
3. Tighten the connections to the specified torque.
Tightening torque:
Flare nuts 13 - 17 Nm (130 - 170 kg.cm, 9 - 12 ft. lbs.)
Brake hose to front caliper 25 - 30 Nm (250 - 300 kg.cm, 18 - 22 ft. lbs.)