Rear Speaker - Wiring Instructions
Group: Body ElectricalNumber: 94-9O-O1O
Date: AUGUST, 1994
Model: 1994 EXCEL
Subject:
ADDITION OF REAR SPEAKERS
Two 1994 Excel base model radios were installed by the factory, the H810 (early production) or the H510 (later production). Vehicles that come from the factory with only two front speakers installed can easily be changed to accommodate two additional rear speakers. To change the audio system from a two speaker system to a four speaker system:
1. Remove the lower radio facia panel
2. Locate the 2 pin connectors tie-wrapped to the harness near the cigarette lighter. These connectors are a part of the vehicle's main wiring harness.
White connector to black connector = 2 speaker system
White connector to white connector = 4 speaker system
Disconnect the black and white 2 pin connectors and connect the two white 2 pin connectors.
3. Replace the lower facia panel.