A/T - Solenoid Valve Connector Change

Group: TRANSAXLE
Number: 93-40-016-1
Date: OCTOBER, 1993
Model: EXCEL, ELANTRA

Subject:
AUTOMATIC TRANSAXLE SOLENOID VALVE CONNECTOR CHANGE

This Technical Service Bulletin has been revised to reflect the models affected.





The Excel and Elantra Automatic Transaxle solenoid connector design has been changed. The previous design used a connector that was located at the transaxle case. The new design uses a connector that is located at the end of a 12 inch lead wire that goes up to the top of the transaxle.