Fuel Pump: Service and Repair

High Pressure Elecric Fuel Pump:

REMOVAL
Fuel tank removal is required to service the fuel pump. For these procedures refer to FUEL TANK, under the appropriate paragraph heading.

Fuel Pump Mounting Screws:

After fuel tank removal, remove the fuel pump installation screws, then remove the pump from the fuel tank.

INSTALLATION

Fuel Pump Positioning Projections:

1. Install the gasket, taking care to properly align it with the three positioning projections.
2. As the fuel pump is re-installed, align the three positioning projections with the holes in the fuel pump. Care should be taken at this time to insure that the gasket is properly seated.
3. Install the fuel tank, refer to FUEL TANK, under the appropriate paragraph heading.