Warranty Information (Three Solenoid CARB)

VEHICLES AFFECTED

Hyundai Motor Amedca is campaigning the following 1987 Excels up to and including the following VINS:

^ Manual Transaxles
- KMHLDXXXXHU094763 and before (3 door) produced on and before 6/2/87
- KMHLFXXXXHU232438 and before (4 door) produced on and before 6/1/87
- KMHLAXXXXHU200008 and before (5 door) produced on and before 6/1/87
^ Automatic Transaxles
- KMHLDXXXXHU087506 and before (3 door) produced on and before 5/15/87
- KMHLFXXXXHU221103 and before (4 door) produced on and before 5/16/87
- KMHLAXXXXHU194779 and before (5 door) produced on and before 5/16/87

Vehicles with these VIN ranges must also meet the following conditions for eligibility:

^ originally certified for use in California
^ initially registered in California
^ currently registered in California
^ normally operated in California

This campaign becomes effective on March 29, 1990. Any repairs performed prior to March 29, 1990, will not be accepted under this campaign.

PROCEDURES COVERED

This Campaign covers the following repairs and services, regardless of the vehicle's age or mileage:

^ Replacement of the carburetor primary main air jet.
^ Installation of a carburetor choke shim cap.
^ Cleaning of the sub-EGR valve, choke linkage, and secondary main air jet area.
^ Installation of a jumper wire between the ECU and main wiring harness.
^ Resetting of the ignition timing.

All owners of the affected vehicles are being notified by mail beginning March 29, 1990, that they should bring their cars in for this service. Your dealership will be reimbursed for labor costs associated with the cleaning, resetting and required parts installation and replacement.

REPLACED PARTS

Please tag and retain the original primary main air jets and choke shim installation handles as per Section 7 of the Warranty Policy and Procedure Manual. Place the original primary main air jet and choke shim installation handle into the new replacement primary main air jet's bag. Original primary main air jets and choke shim installation handles may be requested under normal warranty return procedures. Do NOT automatically ship the primary main air jets to the Warranty Technical Center (WTC) in Fountain Valley, California, until they are specifically requested via your DCS. If these parts are not requested by HMA within 60 days from claim approval, please destroy and discard these parts. Failure to render these replaced parts useless could expose your Dealership to future liability, so please dispose of unrequested parts properly.

ONLY GENUINE HYUNDAI PARTS MAY BE USED

Only HYUNDAI Genuine Parts supplied by Hyundai Motor America's Parts Department may be used for this repair. The primary main air jet, carburetor choke shim cap, and jumper wire are provided as a kit (P/N 32103-21Q10 or its successor).

HOW TO ENTER A CLAIM

All claims for this Campaign will be reimbursed under Campaign Code 000001R0.

If you should require additional warranty information, please coordinate your request with your District Parts and Service Manager and your Regional Warranty Manager.