Carrier Bearings: Service and Repair

Differential Side Bearing Replacement

Special Tools
* J 8092 - Universal Driver Handle
* J 8433 - Two Jaw Puller
* J 22912-B - Split Plate Bearing Puller
* J 29710 - Differential Side Bearing Installer
* J 36597 - Side Bearing Puller Pilot
* J 45766 - Differential Side Bearing Remover

Removal Procedure

1. Remove the differential assembly. Refer to Front Differential Assembly Replacement (Front Differential Assembly Replacement).
2. To remove the left differential side bearings, follow steps 3 through 7.




3. Install the J 45766 - remover
4. Install the J 36597 - pilot (3).
5. Install the J 8433 - puller (2).
6. Using the J 8433 - puller and rotating it clockwise, remove the differential side bearing.
7. To remove the right differential side bearings follow steps 8 through 11.




8. Install the J 45766 - remover
9. Install the J 36597 - pilot (3).
10. Install the J 8433 - puller (2).
11. Using the J 8433 - puller and rotating it clockwise, remove the differential side bearing.

Installation Procedure





Note: In order to protect the differential case, install the J 36597 on the opposite side of the bearing installed.

1. Install the J 36597 - pilot
2. Using the J 29710 - installer (21) and the J 8092 - handle (1), install the differential side bearing.
3. Install the differential assembly. Refer to Front Differential Assembly Replacement (Front Differential Assembly Replacement).