System Specifications
FRONT BRAKESRotor Minimum Allowable Thickness After Refinish 27.0 mm (1.06 in)
Rotor Discard Thickness * 26.5 mm (1.04 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Maximum Allowable Lateral Runout 0.06 mm (0.002 in)
REAR BRAKES
Rotor Minimum Allowable Thickness After Refinish 11.0 mm (0.433 in)
Rotor Discard Thickness * 10.5 mm (0.413 in)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Rotor Maximum Allowable Lateral Runout 0.06 mm (0.002 in)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.