Front Crankshaft Seal: Service and Repair

Crankshaft Front Oil Seal Replacement

Tools Required

J 45951 Front Seal Installer

Removal Procedure

1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement (Service and Repair).





Important: Do not damage the engine front cover or the crankshaft.

2. Pry out the crankshaft front oil seal using a suitable tool.
Discard the seal.

Installation Procedure




1. Apply the engine oil to the outside diameter of the crankshaft front oil seal.




2. Use the J 45951 to install the NEW crankshaft front oil seal.
3. Remove the J 45951 .
4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement (Service and Repair).