Evaporative Emission Hoses/Pipes Replacement - Engine

Evaporative Emission Hoses/Pipes Replacement - Engine

Removal Procedure
Caution: Refer to Fuel and Evaporative Emission Pipe Caution (Technician Safety Information) .
Caution: Refer to Gasoline/Gasoline Vapors Caution (Service Precautions) .

Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice (Vehicle Damage Warnings) .






1. Disconnect the evaporative emission (EVAP) line (1) from the throttle control module (2). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .
2. Disconnect the EVAP line (1) from the EVAP canister purge solenoid valve (3). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .
3. Remove the EVAP hose (1) from the engine.



Installation Procedure





1. Position the EVAP hose (1) to the engine.
2. Connect the EVAP line (1) to the EVAP canister purge solenoid valve (3). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .
3. Connect the EVAP line (1) to the throttle control module (2). Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .