Scan Tool Data Definitions

Scan Tool Data Definitions

4WD High Indicator Light

This parameter displays On when the transfer case shift control module commands the 4WD high indicator light On. The scan tool displays On or Off.

4WD High Lock Indicator Light

This parameter displays On when the transfer case shift control module commands the 4WD high lock indicator light On. The scan tool displays On or Off.

4WD Low Active

This parameter displays Yes when the transfer case is currently in the 4WD low lock mode. The scan tool displays Yes or No.

4WD Low Lock Indicator Light

This parameter displays On when the transfer case shift control module commands the 4WD low lock indicator light On. The scan tool displays On or Off.

ATC Application

This parameter displays the model number assigned to the transfer case. The scan tool displays a numeric value.

Encoder Circuits A, B, C, and P

This parameter displays Off if a high voltage is detected at the circuit. The parameter displays On if the encoder motor grounds the circuit and pulls the voltage low. The encoder circuits allow the transfer case shift control module to determine what position the transfer case is in.

Encoder Gear Position

This parameter displays the mode the transfer case is currently in.

Encoder Supply Voltage

This parameter displays the voltage supplied to the encoder motor. The scan tool displays a range of 0-25 volts.

GM Part Number

This parameter displays the GM part number assigned to the module package: module, software, and calibrations. The scan tool displays a numeric value.

Ing. Cycles Since Last Current DTC

This parameter displays how many ignition cycles have occurred since last current DTC was set. The scan tool displays a numeric value.

Mode Switch Return Voltage

This parameter displays the return voltage from the transfer case shift control switch. The scan tool displays a range of 0-5 volts.

Mode Switch Selected

This parameter displays the transfer case shift control switch button currently depressed by the driver.

Motor A High Side Driver

This parameter displays On when battery voltage is applied to the Motor A Circuit. The scan tool displays On or Off.

Motor A Low Side Driver

This parameter displays On when ground is applied to the Motor A Circuit. The scan tool displays On or Off.

Motor B High Side Driver

This parameter displays On when battery voltage is applied to the Motor B Circuit. The scan tool displays On or Off.

Motor B Low Side Driver

This parameter displays On when ground is applied to the Motor B Circuit. The scan tool displays On or Off.

Neutral Indicator Light

This parameter displays On when the transfer case shift control module commands the neutral indicator light On. The scan tool displays On or Off.

Rear Axle Lock

This parameter displays On when the transfer case shift control module commands the rear axle lock solenoid to be applied. The scan tool displays On or Off.

Rear Axle Lock Indicator Light

This parameter displays On when the transfer case shift control module requests the rear axle lock indicator On. The scan tool displays On or Off.

Rear Axle Lock Request

This parameter displays On when the transfer case shift control module receives a rear axle lock request from the transfer case shift control switch or a scan tool. The scan tool displays On or Off.

Software ID

This parameter displays a numeric value indicating which version of software is currently installed in the transfer case shift control module.