Canister Vent Valve: Service and Repair

Evaporative Emission Canister Vent Solenoid Valve Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the evaporative emission (EVAP) canister vent solenoid valve electrical connector (1).




3. Disconnect the fuel fill pipe vapor line quick connect (1) from the EVAP canister.




4. Disconnect the EVAP canister vent solenoid valve quick connect from the EVAP canister.
5. Disengage the bracket retaining tab and remove the EVAP canister vent solenoid valve (1).

Installation Procedure




1. Engage the bracket retaining tab and install the EVAP canister vent solenoid valve (1).
2. Connect the EVAP canister vent solenoid valve quick connect to the EVAP canister.




3. Connect the fuel fill pipe vapor line quick connect (1) to the EVAP canister.




4. Connect the EVAP canister vent solenoid valve electrical connector (1).
5. Lower the vehicle.