Traction Off Indicator Always On

Traction Off Indicator Always On

Diagnostic Fault Information

Important: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Diagnostic System Check - Vehicle

Circuit/System Description

The instrument panel cluster (IPC) illuminates the traction off indicator by supplying ground to the lamp. The electronic brake control module (EBCM) sends a serial data messages to the IPC, in order to command the indicator ON or OFF.

Circuit/System Testing

Note:Diagnose all vehicle DTCs before using this diagnostic.

With the scan tool, select instrument panel special functions Lamp Test. Command the instrument panel warning lamps OFF.

If the traction off indicator does not turn off, replace the IPC. If the traction off indicator turns off and there are no DTCs stored in any vehicle systems, replace the EBCM.

Repair Instructions

Important: Always perform the Diagnostic Repair Verification after completing the diagnostic procedure. Verification Tests

Control Module References for EBCM or IPC replacement, setup, and programming