Air Inlet Grille Panel Replacement

Air Inlet Grille Panel Replacement

Removal Procedure

1. Remove the non-functional air inlet caps.
2. Remove the wiper arms.




3. Disconnect the wiper hose connection (1).
4. Using a flat-bladed tool, remove the push-in retainers (2).
5. Remove the side fasteners.
6. Using a flat-bladed tool, release the 4 retainers (3) securing the air inlet grille to the vehicle.
7. Remove the air inlet grille from the vehicle.

Installation Procedure




1. Align the air inlet grille to the vehicle, and secure grille by ensuring all 4 retainers (3) are properly seated.
2. Connect the washer hose connection (1).
3. Install the push-in retainers.

Notice: Refer to Fastener Notice.

4. Install the side fasteners.

Tighten the fasteners to 2.5 N.m (22 lb in).

5. Install the wiper arms.
6. Install the non-functional air inlet caps.