Rear Suspension

Stabilizer Shaft Insulator Replacement

Removal Procedure




1. Remove the stabilizer shaft insulator bracket mounting bolts.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Support the rear axle at curb height.
4. Separate the stabilizer shaft from the axle.
5. Remove the stabilizer shaft insulators brackets.
6. Remove the stabilizer shaft insulators.

Installation Procedure




1. Install the stabilizer shaft insulators to the stabilizer shaft.
2. Install the stabilizer shaft insulator brackets to the rear axle.

Notice: Refer to Fastener Notice.

3. Install the stabilizer shaft bracket mounting bolts.

Tighten the insulator bracket bolts to 33 N.m (24 lb ft).

4. Remove the rear axle support.
5. Lower the vehicle.