Connecting Rod, Engine

Connecting Rod Bore Diameter - Bearing End 56.505-56.525 mm ( 2.224-2.225 in)
Connecting Rod Bore Out-of-Round - Bearing End - Production 0.006 mm (0.0002 in)
Connecting Rod Bore Out-of-Round - Bearing End - Service 0.006 mm (0.0002 in)
Connecting Rod Side Clearance 0.11-0.51 mm (0.00433-0.02 in)

Connecting Rod Bolts - First Pass 20 N.m (15 lb ft)
Connecting Rod Bolts - Final Pass 75 degrees