Head Restraint Replacement

Head Restraint Replacement

Removal Procedure




1. Pull the head restraint to the full height position.
2. Insert a pointed tool into the access hole (1) and press inwards.
3. Pull the head restraint from the seat.
4. Disconnect the video connector if the head restraint is equipped with the video display.

Installation Procedure

1. Connect the video connector if the head restraint is equipped with the video display.




2. Install the head restraint by pushing down on restraint until the restraint is fully seated.
3. To ensure the head restraint is fully seated pull the head restraint up to the full upward position.
The head restraint must not come off the restraint rod.