Fuel Hose/Pipes Assembly Replacement

Fuel Hose/Pipes Assembly Replacement

Removal Procedure

1. Clean all the fuel pipe and hose connections and the surrounding areas before disconnecting in order to avoid possible contamination of the fuel system.
2. Remove the fuel tank.




3. Remove the rear fuel feed pipe and the rear fuel return pipe from the fuel sender and the fuel tank clips.
4. Cap the fuel pipes in order to prevent possible fuel system contamination.

Installation Procedure




1. Remove the caps from the fuel pipes.
2. Connect the rear fuel feed pipe and the rear fuel return pipe to the fuel sender and the fuel tank clips.
3. Install the fuel tank.