FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2007 >> H2 V8-6.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Air Door >> Air Door Actuator / Motor >> Service and Repair >> Recirculation Actuator Replacement

Recirculation Actuator Replacement



Recirculation Actuator Replacement

Removal Procedure

1. Remove the instrument panel (I/P) upper trim pad.
2. Disconnect the electrical connector from the recirculation actuator.




3. Remove the screws from the recirculation actuator (1).
4. Remove the recirculation actuator (1) from the HVAC module assembly (2).

Installation Procedure




1. Install the recirculation actuator (1) to the HVAC module assembly (2).

Notice: Refer to Fastener Notice.

2. Install the screws to the recirculation actuator (1).

Tighten the screws to 2 N.m (18 lb in).

3. Connect the electrical connector to the recirculation actuator.
4. Install the I/P upper trim pad.
5. Reprogram the recirculation actuator. Refer to Re-Calibrating Actuators. Programming and Relearning
pro multis Credits:Operation CHARM About Operation CHARM