Air Temperature Actuator Replacement - Right

Air Temperature Actuator Replacement - Right

Removal Procedure

1. Remove the I/P carrier.




2. Disconnect the electrical connector (4) from the right air temperature actuator (3).
3. Remove the screws from the right air temperature actuator (3).
4. Remove the right air temperature actuator (3) from the HVAC module assembly (2).

Installation Procedure




1. Install the right air temperature actuator (3) to the HVAC module assembly (2).

Notice: Refer to Fastener Notice.

2. Install the screws to the right air temperature actuator (3).

Tighten the screws to 2 N.m (18 lb in).

3. Connect the electrical connector to the right air temperature actuator.
4. Install the I/P carrier.
5. Reprogram the air temperature actuator. Refer to Re-Calibrating Actuators. Programming and Relearning