Windshield Pillar Garnish Molding Replacement

Windshield Pillar Garnish Molding Replacement

Removal Procedure




1. Using a suitable flat bladed tool, release the retaining tabs and remove the assist handle.
2. Rotate the windshield garnish molding inboard to disengage the retaining tab, then rotate rearward to remove from vehicle.
3. Disconnect the speaker connector.
4. Remove the windshield garnish molding from the vehicle.

Installation Procedure




1. Install the windshield garnish molding to the vehicle.
2. Connect the speaker connector.
3. Rotate the windshield garnish molding forward and outboard to engage the retaining tab.
4. Install the assist handle and press in the retaining tabs.