Sunshade Anchor Replacement

Sunshade Anchor Replacement

Removal Procedure




1. Insert a suitable flat-bladed tool (2) into the opening at the front of the retainer and push the tool forward at a slight upward angle to contact the retaining clip (1).
2. Press to disengage the clip from the body.
3. Gently pull the retainer from the headliner.
4. Remove the sunshade anchor.

Installation Procedure




1. Align the sunshade anchor with the headliner and the body openings.
2. Insert the retaining clip (1) through the anchor and the headliner.
3. To fully seat the retainer in the body, firmly press on the retainer until you hear a click.