Steering Column Bracket Replacement

Steering Column Bracket Replacement

Removal Procedure

1. Loosen and move center console rearward for access to the knee bolster bolt. Refer to Console Replacement.
2. Remove the screws/bolts that hold the knee bolster trim panel to the instrument panel (I/P).




3. Remove the nuts that hold the knee bolster deflector to the I/P.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Align and fasten the nuts that hold the knee bolster deflector.

Tighten the nuts to 2 N.m (18 lb in).

2. Fasten the screws/bolts that hold the knee bolster trim panel to the I/P. Refer to Driver Knee Bolster Panel Replacement.
3. Align and move forward center console in place and fasten to the center console bracket. Refer to Console Replacement.