Radio Rear Side Door Speaker Replacement
Radio Rear Side Door Speaker Replacement
Removal Procedure
1. Remove the door trim panel.
2. Partially remove the water deflector to access the speaker bolts.
3. Remove the bolts retaining the speaker to the door.
4. Disconnect the electrical connector from the speaker.
5. Remove the speaker from the vehicle.
Installation Procedure
1. Install the speaker to the vehicle.
2. Connect the electrical connector to the speaker.
Notice: Refer to Fastener Notice.
3. Install the bolts retaining the speaker mounting bracket to the door.
Tighten the bolts to 6 N.m (53 lb in).
4. Install the door trim panel.
5. Verify the component operation.