16. Transmission Extension Assemble

Transmission Extension Assemble





1. For the 4WD transmission, install the shift control shaft plug.





2. If removed, install the reverse control lever restrictor.





3. Install a new reverse control lever restrictor roll pin.





4. Notice: Install a new reverse restrictor pin plug.

^ Tighten the reverse restrictor pin plug to 19 Nm (14 ft. lbs.).





5. Install the oil receiver.





6. If RWD, install the oil trough.
7. Install the oil trough bolt.
^ Tighten the oil trough bolt to 11 Nm (8 ft. lbs.).