Brake Switch (Cruise Control): Service and Repair

CRUISE RELEASE SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the cruise control release switch electrical connector (1).




2. Complete the following in order to remove the cruise release switch from the brake pedal bracket:
1. Rotate the switch counterclockwise.
2. Pull the switch from the retainer.
3. Push the locking tabs inward to release the retainer.

INSTALLATION PROCEDURE




1. Slide only the cruise release switch retainer into the brake pedal bracket until the locking tabs are fully engaged.
2. Adjust the cruise control release switch. Refer to Cruise Release Switch Adjustment.