Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine

EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - ENGINE

REMOVAL PROCEDURE

CAUTION:
- Refer to Fuel and EVAP Pipe Caution in Service Precautions.
- Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.

NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.




1. Disconnect the evaporative emission (EVAP) line (1) from the throttle control module (2).
2. Disconnect the EVAP line (1) from the EVAP canister purge solenoid valve (3).
3. Remove the EVAP hose (1) from the engine.

INSTALLATION PROCEDURE




1. Position the EVAP hose (1) to the engine.
2. Connect the EVAP line (1) to the EVAP canister purge solenoid valve (3).
3. Connect the EVAP line (1) to the throttle control module (2).