Scan Tool Data Definitions

Scan Tool Data Definitions
ECT - Range: -40°C to +150°C (-40°F to +302°F)
The PCM applies 5.0 volts to the ECT sensor circuit. The sensor is a thermistor which changes internal resistance as the engine temperature changes. When the sensor is cold (internal resistance high), the PCM senses a high signal voltage and interprets the voltage as a cold engine. As the sensor warms (internal resistance decreases), the voltage signal decreases and the PCM interprets the lower voltage as a warm engine.

Displayed Coolant Temperature - Range: 32-127°C (89-260°F)
This data is the coolant temperature the Instrument Cluster is attempting to display on the coolant temperature gauge. This data may differ from the monitored coolant temperature for a period of time due to filtering. The data may also differ from the monitored coolant temperature when coolant temperature is not in the range of 71-127°C (160-260°F) since the display is limited to these values. If a class 2 communication failure occurs, this data will be at the minimum value of 32°C (89°F).

Monitored Coolant Temperature - Range: 40-215°C (40-419°F)
This data is the clusters measurement of the engine coolant temperature as provided by the PCM on the class 2 serial data line.