Power Brake Booster Inlet Hose Replacement

Power Brake Booster Inlet Hose Replacement
Removal Procedure





1. Remove the brake master cylinder assembly.





2. Caution:

Important: Allow the brake fluid to drain into a suitable container.

Reposition the clamp (1) on the brake booster inlet hose (2) to allow removal of the hose.
3. Remove the brake booster inlet hose (2).

Installation Procedure





1. Important: Position the clamps to allow installation of the inlet hose.

Install the brake booster inlet hose (2).
2. Install the clamps (1).





3. Install the brake master cylinder assembly.