Fuel Tank Vent Lines Service

Figure 3-37: Fuel Tank Vent Line Locations (Typical):

Fuel Tank Vent Line Service

Removal
1. Remove fuel tank.
2. Remove clip and fuel tank vent line hose from vent line (Figure 3-37).
3. Remove vent line clamps and disenagage lines.
4. Remove tie strap securing vent line to fuel lines. Discard tie strap.
5. Disconnect fuel tank vent lines at tank fittings.

Installation
1. Connect vent lines to tank fitting.
2. Secure vent line to fuel lines with new tie strap (Figure 3-37).
3. Secure vent lines in brackets with clamps and bolts.
4. Install fuel tank.