Exterior Parts Removal / Installation

Exterior Parts Removal/Installation

NOTE:
- When removing the front fender, do not deform the upper portion (A) of the front fender.
- To adjust the doors in or out, replace the mounting bolts (B) with adjusting bolts; refer to the appropriate Parts Catalog for the necessary adjusting bolts.
- Apply spot sealer to the mating surfaces, then install the front fenders, the hood, the doors, the tailgate, and the hinges.
- Check the hood, the doors, and the tailgate positions; refer to the external parts fitting positions.
- Before attaching the front fender, apply sealer to the mating surface of the front fender and the front pillar outer panel.
- Apply sealant around the tailgate hinges.