A/T Gear Position Indicator Panel Replacement

A/T Gear Position Indicator Panel Replacement

NOTE: Do not wipe off the grease that is applied to the portion of the shift lever marked with an asterisk (*) when you disassemble or assemble It because a special grease is used.

1. Remove the center console Center Console Removal / Installation.

2. Apply the parking brake, and move the shift lever to N.

3. Wrap the end of a thin blade screwdriver with tape, pry the shift lever knob cover (A), and remove it.






4. Remove the screws (B) and the shift lever knob (C).

5. Remove the A/T gear position indicator panel light socket (A).





6. Wrap the end of a thin blade screwdriver with tape, and pry up the A/T gear position indicator panel (B) by releasing the four locks (C) from the shift lever bracket base (D).

7. Remove the lever cover (A) from the A/T gear position indicator panel (B).





8. Check the lever cover for wear and damage, and replace it if necessary.

9. Install the lever cover to the new A/T gear position indicator panel.

10. Install the A/T gear position indicator panel (A) to the shift lever bracket base (B), and push the locks (C) to the hooks (D) securely.





11. Install the A/T gear position indicator panel light socket (E).

12. Install new screws (A) to secure the shift lever knob to the shift lever (B).






13. Install the shift lever knob cover (C) by pushing the shift lever knob cover onto the shift lever knob securely.

14. Install the center console Center Console Removal / Installation.

15. Shift the shift lever to P.