CVT Housing Selector Control Shaft Oil Seal Replacement

CVT Housing Selector Control Shaft Oil Seal Replacement

Special Tools Required

- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 24 x 26 mm 07746-0010700

1. Remove the selector control shaft CVT Housing Selector Control Shaft Removal/Installation.

2. Remove the selector control shaft oil seal (A) from the transmission housing (B).






3. Install a new selector control shaft oil seal (A) flush with the transmission housing level (B) using the 15 x 135L driver handle and the 24 x 26 mm bearing driver attachment.






4. Install the selector control shaft CVT Housing Selector Control Shaft Removal/Installation.