CVT Housing CVTF Pump Replacement

CVT Housing CVTF Pump Replacement

NOTE: Replace the CVTF pump with assembly for nonresolution parts.

1. Remove the CVTF pump drive chain and the CVTF pump sprocket CVT Housing CVTF Pump Sprocket/Chain Removal/Installation.

2. Remove the three bolts securing the CVTF pump (A), then remove the CVTF pump from the transmission housing.





3. Remove the 22 x 10 mm CVTF pipe (B), the 18 x 10 mm CVTF pipe (C), the O-rings (D), the two dowel pins (E), and the snap ring (F).

4. Replace the CVTF pump.

5. Install the 22 x 10 mm CVTF pipe and the 18 x 10 mm CVTF pipe in the transmission housing, then install new two O-rings over the CVTF pipes.

6. Install a new CVTF pump (three bolts) with two dowel pins. Do not pinch the O-rings.

7. Install the snap ring in the snap ring groove.

8. Install the CVTF pump chain and the CVTF pump sprocket CVT Housing CVTF Pump Sprocket/Chain Removal/Installation.