Fuel Pressure Pulsation Damper: Service and Repair

Fuel Pulsation Damper Replacement

1. Remove the fuel rail Service and Repair.

2. Place a wrench (A) on the fuel rail (B).





3. Place second wrench (C) on the fuel pulsation damper (D).

4. Remove the pulsation damper by holding the first wrench while turning the second wrench.

5. Install the fuel pulsation damper in the reverse order of removal with new washers.

NOTE:

- Replace all washers whenever the fuel pulsation damper is loosened or removed.
- If the drain hole (A) of the fuel pulsation damper cover does not face down, reinstall it as shown.