Driver's Dashboard Undercover Removal / Installation

Driver's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.

1. Remove the driver's dashboard undercover (A).

1. Turn the lock knob (B) 90 °.

2. Gently pull down the rear edge to detach the clips (C, D).

3. Pull the undercover away to release the pins (E) from the holders (F).





2. Install the undercover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the pins into place securely.