Front Fender Cover Replacement

Front Fender Cover Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body or the windshield.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the hood hinge cover Service and Repair.

2. Carefully insert a appropriate trim tool (A) next to the boss (B), and detach the boss and peel off the double-face adhesive tape (C) by prying on the front fender cover (D).

NOTE: Apply protective tape (E) to the body as shown.





3. Install the front fender cover in the reverse order of removal, and push the boss into place securely.