ECT Sensor 1 Replacement

ECT Sensor 1 Replacement

1. Drain the engine coolant Service and Repair.

2. Remove the air cleaner Service and Repair.

3. Disconnect the CMP sensor A 3P connector (A), and the CMP sensor B 3P connector (B).





4. Remove the harness cover (C).

5. Disconnect the ECT sensor 1 2P connector (A).





6. Remove ECT sensor 1 (B).

7. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant Service and Repair.