ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

1. Drain the engine coolant Service and Repair.

2. Remove the splash shield; 2-door Front Splash Shield Replacement (2-Door), 4-door Front Splash Shield Replacement (4-Door).

3. Disconnect the ECT sensor 2 2P connector (A), then remove ECT sensor 2 (B).





4. Install parts in the reverse order of removal with a new O-ring (C).

5. Install the splash shield; 2-door Front Splash Shield Replacement (2-Door), 4-door Front Splash Shield Replacement (4-Door).

6. Refill the radiator with engine coolant Service and Repair.