Manufacturer Code Charts: 2610

Navigation System DTC Troubleshooting: 2610

DTC 2610:

DRAM Diag

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- his navigation DTC sets when a problem with the audio-navigation unit internal DRAM is detected.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode in the Select Diagnosis items menu Navigation System Diagnostic Mode.

4. Select the ECU Info in the System Links.

Is D-RAM OK indicated?

YES -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).�

NO -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).�