Passenger's Power Window Switch Test/Replacement

Passenger's Power Window Switch Test/Replacement

1. 4-door: Remove the passenger's switch (A).
2-door: Remove the passenger's switch. Door Panel Removal/Installation (2-Door)

Front passenger's





Rear









2. Check for continuity between the terminals in each switch position according to the table.

3. Connect battery power to terminal No. 4 and ground terminal No. 7 (or No. 8). The switch light should come on.

4. If the continuity or switch light tests is not as specified, remove the screws and replace the switch.

5. Install the power window master switch in the reverse order of removal.