Front Seat Frame Replacement - Driver's Seat

Front Seat Frame Replacement - Driver's Seat

Driver's Seat

SRS components are located in this area. Review the SRS component locations, 2-door, SRS Component Location Index (2-Door) 4-door SRS Component Location Index (4-Door) and the precautions and procedures Service and Repair before doing repairs or service.

NOTE:

- Put on gloves to protect your hands.

- Apply oil to the pivot area of the slide lock.

- Apply multipurpose grease to the sliding area and pivot area of the seat tracks.

- If the side airbag has deployed, replace the seat frame and related parts with new ones. Service and Repair

1. Remove the front seat. Front Seat Removal/Installation

2. Remove these items:
- Front seat-back cover/pad:
- 2-door Front Seat-Back Cover Replacement

- 4-door Front Seat-Back Cover Replacement

- Front seat cushion cover/pad:
- 2-door Front Seat Cushion Cover Replacement

- 4-door Front Seat Cushion Cover Replacement

- Seat position sensor Service and Repair

- Front seat belt buckle Front Seat Belt Replacement

3. Detach the clips, then remove the recline inner covers (A), the outer upper rail cover (B), the inner upper rail cover (C), and the side airbag module holder (D) from the seat frame (E).

4. Install the seat frame in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Make sure the seat wiring harnesses are routed properly and not pinched.

- Make sure seat position sensor connector is plugged in properly.

- Push the clips into place securely.