Tripped Sensor History

Tripped Sensor History

The security system stores information on the last tripped sensor if the security system has been violated. The information can be retrieved using the HDS.

To retrieve the last tripped sensor data:

1. Select HISTORY DATA from the security system test mode menu.

2. Select CURRENT DATA.

3. Confirm that the VIN matches the Vehicle then press the enter button.

4. Scroll through the data list.
- Sensors that were activated will indicate ON.

- Sensors that were not activated will indicate NONE.

5. Inspect the ON circuit for these problems:
- Misadjusted or damaged switch.

- Loose or corroded connections.

- Intermittent short to ground.

NOTE: If PANIC Frame Reception is indicated ON, inform the customer that it could have been set by something pressing the panic button of one of the registered remotes (in a pocket or purse, under a stack of papers, etc.).