Rear License Trim Replacement (2-Door)

Rear License Trim Replacement

2-door

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the trunk lid.

1. From inside the trunk lid, remove the nuts securing the rear license trim (A), and push out the clips.

With keyless entry system





Without keyless entry system





2. Gently close the trunk lid, detach the clip, and remove the rear license trim (A).

3. Install the trim in the reverse order of removal, and note these items:
- If the clips is damaged or stress-whitened, replace it with a new one.

- Push the clip into place securely.